GOAP Z-Wave ON/OFF Thermostat

Home  » Climate Control » GOAP Z-Wave ON/OFF Thermostat
GOAP Z-Wave ON/OFF Thermostat
Click to enlarge
Price: $109.00
Availability : In Stock
Product Code: DHS-HVAC-THR-QUB-01
Quantity:
 Add to Basket
No Reviews Yet

Quick Overview

 

The GOAP Z-Wave ON/OFF Thermostat is ideal for directly controlling electric or water-based heating systems such as electric water heaters or hot water pumps.

  • Z-Wave Plus certified
  • Includes digital temperature sensor
  • Can measure the power consumption of connected device (within 3% accuracy)
  • Extremely low energy consumption (less than 0.4W)
  • Frost free mode: Specifies a minimum temperature for the heating system connected to the module to prevent your pipes from freezing
Product Details

 

The GOAP Z-Wave ON/OFF Thermostat can be used to directly control electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches.

The GOAP Z-Wave ON/OFF Thermostat also measures power consumption and supports the connection of a digital temperature sensor.

 This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;

  • Vera Edge/Plus
  • Fibaro Home Center 2/Lite

 

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Product Support

 

Manuals:

GOAP Z-Wave ON/OFF Thermostat User Manual (Size: 397KB)

GOAP Z-Wave ON/OFF Thermostat Extended User Manual (Size: 3.64MB)

Videos / YouTube:

Technical Specifications

 

RF Protocol
Z‐Wave Plus (500 series chip)
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐Wave device type
Z-Wave binary switch, routing slave
Power Supply
230V AC ± 10% OR 24-30V DC
Rated Load Current of AC Output (resistive load)
1 x 10A / 230V AC
Rated Load Current of DC Output (resistive load)
1 x 10 A / 30V DC 
Output circuit power of AC output (resistive load)
2300W (230V AC)
Output circuit power of DC output (resistive load) 240W (24V DC)
Operation Range
Up to 30m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 60 °C
Weight
48g
Dimensions
41.8mm x 36.8mm x 15.4mm 

Information

  • Products: 123
  • Categories: 13
  • Prices: Australian Dollars
 

Mailing List

Signup for the latest news on new products, special offers and saving opportunities. Subscribe to our mailing list below: